Skip to main content
Flooring FX — Sydney flooring specialists

National Flooring Distributors

Tempess

A 4.5mm board that keeps the full 228.6mm width but drops to a 1219.2mm length — the middle ground between the longboards and the narrow ranges. Twelve colours spanning the widest tonal range NFD offers here, from a near-white Moonlight Oak to the deep Riverstone greys.

Colours
12
Core
LVT
Plank size
1219.2 × 228.6 × 4.5mm
Format
Plank
Tempess — open-plan kitchen dining, blue cabinetry, whitewashed floor

Tempess installed. Photography courtesy of NFD — colours vary between batches and under your own light, so take samples home before you decide.

The range

Tempess colours

  • Moonlight Oak M1 Tempess flooring swatch

    Moonlight Oak M1

    White & ivory

    1219.2 × 228.6 × 4.5mm

  • Odyssey Tassie Oak O1 Tempess flooring swatch

    Odyssey Tassie Oak O1

    Natural oak

    1219.2 × 228.6 × 4.5mm

  • Brighton Oak B1 Tempess flooring swatch

    Brighton Oak B1

    Beige & taupe

    1219.2 × 228.6 × 4.5mm

  • Dawn Oak D1 Tempess flooring swatch

    Dawn Oak D1

    Beige & taupe

    1219.2 × 228.6 × 4.5mm

  • Merryland Oak M3 Tempess flooring swatch

    Merryland Oak M3

    Beige & taupe

    1219.2 × 228.6 × 4.5mm

  • Nickle Oak N1 Tempess flooring swatch

    Nickle Oak N1

    Beige & taupe

    1219.2 × 228.6 × 4.5mm

  • Tamsyn Oak T1 Tempess flooring swatch

    Tamsyn Oak T1

    Beige & taupe

    1219.2 × 228.6 × 4.5mm

  • Rainy Oak R1 Tempess flooring swatch

    Rainy Oak R1

    Grey

    1219.2 × 228.6 × 4.5mm

  • Mature Oak M2 Tempess flooring swatch

    Mature Oak M2

    Brown

    1219.2 × 228.6 × 4.5mm

  • Meadow Blackbutt M4 Tempess flooring swatch

    Meadow Blackbutt M4

    Brown

    1219.2 × 228.6 × 4.5mm

  • Western Spotted Gum W1 Tempess flooring swatch

    Western Spotted Gum W1

    Brown

    1219.2 × 228.6 × 4.5mm

  • Riverstone R2 Tempess flooring swatch

    Riverstone R2

    Charcoal & black

    1219.2 × 228.6 × 4.5mm

Swatch images are the manufacturer’s and are for illustration only. Timber and stone décors vary between batches and look markedly different under your own light — we bring the real samples to your place before you decide.

The detail

Specifications

Plank size
228.6mm × 1219.2mm, 4.5mm thick
Wear layer
0.5mm
Carton
2.79m² — 10 planks
Installation
Loose lay or glue-down (dryback)

Where it doesn’t suit

The wide-but-short board is a genuine compromise and worth understanding rather than defaulting to. You keep most of the wide-plank look, and the shorter length is far more tolerant of a subfloor that is flat but not perfect — which describes most Sydney houses. What you give up is the uninterrupted run down a long hallway, where the extra end joins are visible. If your floor is one long corridor, look at Cascade; if it is rooms, this is the easier floor to get right.

Get an estimate

Know roughly how much you need?

Tell us the area and whether you want it supplied or supplied and installed, and we’ll come back with an itemised estimate for NFD Tempess. Attach a floor plan and we’ll check it before we call.

  • A rough m² is enough to start
  • Supply only, or supply and install

Why there is no price here

The number depends on your area, your subfloor and what preparation it needs — and a preparation surprise on the day is the thing that turns a good quote into a bad one. We measure first, then quote once, itemised.

Specifications sourced from National Flooring Distributors. NFD may change a specification without notice — we confirm the current sheet before every order.

Sydney flooring specialists · 20+ years

See Tempess in your own light

Book a free measure and we'll bring the samples to you, measure up and give you an itemised quote. No pressure, no obligation.

CallFree measure