Skip to main content
Flooring FX — Sydney flooring specialists

National Flooring Distributors

Spellbound

A 3mm longboard, 228mm by 1524mm, in twelve colours from mythical greys through warm honeys to deep earthy tones. It keeps the full 0.5mm wear layer of the thicker ranges on a thinner board, which is the trade worth knowing about: the surface will last as long, it just sits lower.

Colours
12
Core
LVT
Plank size
1524 × 228 × 3mm
Format
Plank
Spellbound — contemporary dining and lounge, pale grey floor

Spellbound installed. Photography courtesy of NFD — colours vary between batches and under your own light, so take samples home before you decide.

The range

Spellbound colours

  • Aura Spellbound flooring swatch

    Aura

    Natural oak

    1524 × 228 × 3mm

  • Divine Spellbound flooring swatch

    Divine

    Natural oak

    1524 × 228 × 3mm

  • Charm Spellbound flooring swatch

    Charm

    Beige & taupe

    1524 × 228 × 3mm

  • Crystal Spellbound flooring swatch

    Crystal

    Beige & taupe

    1524 × 228 × 3mm

  • Wonder Spellbound flooring swatch

    Wonder

    Beige & taupe

    1524 × 228 × 3mm

  • Magic Spellbound flooring swatch

    Magic

    Grey

    1524 × 228 × 3mm

  • Merlin Spellbound flooring swatch

    Merlin

    Grey

    1524 × 228 × 3mm

  • Amulet Spellbound flooring swatch

    Amulet

    Brown

    1524 × 228 × 3mm

  • Bewitch Spellbound flooring swatch

    Bewitch

    Brown

    1524 × 228 × 3mm

  • Enchant Spellbound flooring swatch

    Enchant

    Brown

    1524 × 228 × 3mm

  • Myth Spellbound flooring swatch

    Myth

    Brown

    1524 × 228 × 3mm

  • Rune Spellbound flooring swatch

    Rune

    Charcoal & black

    1524 × 228 × 3mm

Swatch images are the manufacturer’s and are for illustration only. Timber and stone décors vary between batches and look markedly different under your own light — we bring the real samples to your place before you decide.

The detail

Specifications

Plank size
228mm × 1524mm, 3.0mm thick
Wear layer
0.5mm
Carton
4.18m² — 12 planks
Installation
Loose lay or glue-down (dryback)

Where it doesn’t suit

Thickness and durability are not the same thing and this range is where that matters most. Spellbound's 0.5mm wear layer is identical to the 4.5mm and 5mm boards, so the wearing surface is the same — what you lose at 3mm is underfoot comfort, a little acoustic softness, and tolerance for an uneven subfloor. That makes it a good answer when you are matching into an existing floor height or working under a door that cannot be trimmed, and a poor one if the slab underneath is rough. It is also a 1524mm longboard, so the levelling still has to be done properly.

Get an estimate

Know roughly how much you need?

Tell us the area and whether you want it supplied or supplied and installed, and we’ll come back with an itemised estimate for NFD Spellbound. Attach a floor plan and we’ll check it before we call.

  • A rough m² is enough to start
  • Supply only, or supply and install

Why there is no price here

The number depends on your area, your subfloor and what preparation it needs — and a preparation surprise on the day is the thing that turns a good quote into a bad one. We measure first, then quote once, itemised.

Specifications sourced from National Flooring Distributors. NFD may change a specification without notice — we confirm the current sheet before every order.

Sydney flooring specialists · 20+ years

See Spellbound in your own light

Book a free measure and we'll bring the samples to you, measure up and give you an itemised quote. No pressure, no obligation.

CallFree measure