Skip to main content
Flooring FX — Sydney flooring specialists

Preference Floors

Preference Classic Laminate

The value board, and the one that still carries the traditional Australian hardwood colours — Jarrah, Merbau, Kempas, Brush Box — that have largely disappeared from newer ranges. A narrow 125mm plank at 12.3mm thick, AC3 rated, on an FSC-certified HDF core with a lifetime structural warranty, finished at a 65% gloss.

Colours
9
Plank size
1215 × 125 × 12.3mm
Durability
AC3
Format
Plank
Preference Classic Laminate — dining and window seat, blonde blackbutt floor

Classic Laminate installed. Photography courtesy of Preference Floors — colours vary between batches and under your own light, so take samples home before you decide.

The range

Classic Laminate colours

  • Blackbutt Classic Laminate flooring swatch

    Blackbutt

    Natural oak

    1215 × 125 × 12.3mm

  • Brazilian Oak Classic Laminate flooring swatch

    Brazilian Oak

    Natural oak

    1215 × 125 × 12.3mm

  • Euro Oak Classic Laminate flooring swatch

    Euro Oak

    Natural oak

    1215 × 125 × 12.3mm

  • Mountain Spotted Gum Classic Laminate flooring swatch

    Mountain Spotted Gum

    Natural oak

    1215 × 125 × 12.3mm

  • Antique Oak Classic Laminate flooring swatch

    Antique Oak

    Brown

    1215 × 125 × 12.3mm

  • Brush Box Classic Laminate flooring swatch

    Brush Box

    Brown

    1215 × 125 × 12.3mm

  • Kempas Classic Laminate flooring swatch

    Kempas

    Brown

    1215 × 125 × 12.3mm

  • Merbau Classic Laminate flooring swatch

    Merbau

    Brown

    1215 × 125 × 12.3mm

  • Jarrah Classic Laminate flooring swatch

    Jarrah

    Charcoal & black

    1215 × 125 × 12.3mm

Swatch images are the manufacturer’s and are for illustration only. Timber and stone décors vary between batches and look markedly different under your own light — we bring the real samples to your place before you decide.

The detail

Specifications

Wear rating
AC3 — rated for heavy domestic and moderate commercial traffic
Size
1215 × 125 × 12.3mm, 1.515m² per pack
Finish
65% gloss
Core
FSC certified HDF
Profile
Clic system licensed by Flooring Industries, micro bevel on 4 sides — floating install
Underfloor heating
In-slab hydronic only

Where it doesn’t suit

Two things will decide whether this is right for you, and neither is on the spec sheet. The 65% gloss is a lot of shine: it looks sharp on day one and it shows every scuff highlight and footprint after that — a matte board hides wear far better, which is why nearly everything else here is matte. And 125mm is narrow by current taste, so the floor reads as an older one; if you want the wide-plank look, this is not the range. It is here because those dark hardwood tones are genuinely hard to find now and because AC3 is genuinely enough for a bedroom or a rental — not because it is the floor we would steer most people towards.

Get an estimate

Know roughly how much you need?

Tell us the area and whether you want it supplied or supplied and installed, and we’ll come back with an itemised estimate for Preference Preference Classic Laminate. Attach a floor plan and we’ll check it before we call.

  • A rough m² is enough to start
  • Supply only, or supply and install

Why there is no price here

The number depends on your area, your subfloor and what preparation it needs — and a preparation surprise on the day is the thing that turns a good quote into a bad one. We measure first, then quote once, itemised.

Specifications sourced from Preference Floors. Preference may change a specification without notice — we confirm the current sheet before every order.

Sydney flooring specialists · 20+ years

See Classic Laminate in your own light

Book a free measure and we'll bring the samples to you, measure up and give you an itemised quote. No pressure, no obligation.

CallFree measure